| Customization: | Available |
|---|---|
| After-sales Service: | Video Technical Support, Online Support |
| Warranty: | 1year |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Engine | Make: SINOTRUK | |
| Engine model: WD615.62, Euro II emission standard | ||
| 4 stroke direct injection diesel engine | ||
| 6 cylinder in-line with water cooling, turbo-charging & intercooling | ||
| Maximum output: 266hp(196Kw) at 2200 rpm according to DIN | ||
| Maximum torque: 1100Nm at 1100~1600 rpm | ||
| Bore: 126mm; Stroke: 130mm; | ||
| Displacement: 9.726L; Compression ratio: 17:1 | ||
| Specific fuel consumption: 195g/kWh; Engine oil filling quantity: 23L | ||
| Cooling system filling quantity (long-term filling): 40L | ||
| Thermostat opening temperature: 80oC | ||
| Twin cylinder air compressor | ||
| Transmission | Transmission, model HW19710, 10 forward and 2 reverse | |
| Ratio:14.28 10.62 7.87 5.88 4.38 3.72 2.43 1.80 1.34 1.00 13.91/3.18(R) | ||
| Propeller Shaft | Double universal joint propeller shaft with gear-shaped coupling flange | |
| Front Axle | Steering with double T-cross section | |
| Rear Axles | Pressed axle housing, central single reduction and differential locks between axles | |
| Ratio: 4.42 | ||
| Chassis | Frame: U-profile parallel ladder type with section of 300×90×8 mm and reinforced subframe,, all cold riveted cross members | |
| Front suspension: 10 semi-elliptic leaf springs with hydraulic telescopic double-action shock absorbers and stabilizer | ||
| Rear suspension: 12 semi-elliptic leaf springs with bogie spring and stabilizer | ||
| Spare wheel carrier: with one spare wheel | ||
| Fuel tank: with 400+400 L fuel tank with locking fuel cap. | ||
| Steering | ZF81188, hydraulic steering with power assistance | |
| Brakes | Service brake: dual circuit compressed air brake | |
| Parking Brake(emergency brake): spring energy, compressed air operating on rear wheels | ||
| Auxiliary brake: engine exhaust brake | ||
| Wheel & Types | Rims: 8.5-20,10 hole-steel | |
| Types: 12.00R20 | ||
| Driver's cab | Long cab, all steel forward control, 55o hydraulically tiltable to the front,2-arm windscreen wiper system with 3 speeds, laminate windscreen, with casted-in radio aerial, hydraulically damped adjustable driver's seat and rigid adjustable co-driver's seat, heating and ventilation system, with stereo radio/cassette recorder, sun visor, and adjustable steering wheel, air horn, single berth with 4-point support fully floating suspension and shock absorber with transverse stabilizer,safety belt, air conditioner, adjustable roof flap. | |
| Option: air deflector | ||
| Electrics | Operating voltage:24V, negative grounded; Starter: 24V, 5.4KW | |
| Alternator: 28V, 1540W; Batteries: 2×12, 165Ah | ||
| Cigar-lighter, horn, headlamp, fog light, brake lights, indicators and reverse lamp | ||
| Dimensions in mm | Wheel base | 4600 |
| Front wheel track | 2022 | |
| Rear wheel track | 1830 | |
| Front overhang | 1500 | |
| Rear overhang | 2875 | |
| Approach angle(o) | 16 | |
| Departure angle(o) | 12 | |
| Weight in kg | Permissible loading capacity on chassis | 13420 |
| Dead weight | 8450 | |
| Gross vehicle weight | 16000 | |
| Front axle loading capacity | 9000 | |
| Rear axle loading capacity | 13000 | |
| Water tank | Water tank size: 10000L | |
| Water tank material: carbon steel | ||
| With potable water coating | ||
| With stainless steel pump | ||
| With stainless steel pipe valve | ||
1. What is your MOQ?
A:One unit.
2. Can you meet my special requirements?
A:Sure! We are a direct manufacturer, we have strong production capacity and research and development capabilities!
3. How is the quality of your products?
A:High quality has always been our advantage. We all use high-quality branded materials with 100% quality assurance. A procedure is established to inspect products, raw materials, process materials, finished materials that have been verified or tested, etc.at all stages of the manufacturing process.
4. How can I get the price of your vehicle?
A:You can contact us through any of the following contact methods. Our personalized service staff will reply you within 24 hours.
5. Is it possible to print our own brand on the vehicle?
A:It's totally acceptable.
6: What is the delivery time?
A:The delivery time is within 30-50 working days after receiving your prepayment.
){kind=link}