Factory Handles and Sells Stock High-Quality Water Tankers at Low Prices/10 Cubic Meters of Water Tankers

• Customization: Available
• Warranty: 1 Year
• Specification: 8110× 2500× 3160/mm
• Model NO.: LSCX2202131
• Trademark: LISHIXIN
• Origin: Mainland in China
• HS Code: 87163990
• Production Capacity: 500

Product Description

factory handles and sells stock high-quality water tankers at low prices/10 cubic meters of water tankers

Detailed Photos

Product Parameters

Vehicle model		BJ5182GSS-1
The main dimensions of the vehicle	External dimensions (length×width×height)mm	8110×2500×3160
	Drive type	4×2
	Wheelbase(mm)	4600
	Wheel base (front/rear)mm	2010/1865
Quality parameter	Whole vehicle curb quality(kg)	7004
	Rated loading quality(kg)	10866
	Rated number of passengers (person)	3
	(kg)Total mass (kg)	18000
Main performance parameters of the whole vehicle	(km/h)Maximum speed	89
	(%)Maximum grade	38
engine	model	WP10.270E32
	(L)Displacement	9.726
	Calibration power/calibration speed(kw/rpm)	199/270(2200)
	Maximum torque/speed(N.m/rpm)	1100(1200-1600)
transmission	model	9JS119T-B(Q)(With power take-off)
clutch	Type	φ430 diaphragm spring clutch
Rear axle	Type / main reducer speed ratio	/4.813T double-stage deceleration/4.8
suspension	Number of front suspension/spring	,9Longitudinal leaf spring + cylinder shock absorber, 9
	Number of rear suspension/spring	,9+6Vertical main and auxiliary leaf springs, 9+6
Steering gear		AM75L
Brake system	Service brake type	Double loop pneumatic drum
	Parking brake type	Energy storage spring cut-off brake
	Auxiliary brake	Engine exhaust brake
Number of wheels and tire specifications		6+1/11.00R20
Fuel tank (L)		380
basic configuration		Manual cab lift, airbag seat, manual rearview mirror glass lifter, air conditioner
Upload parameters
A.TANK BARREL
1. Tank Profile	Round shape
2. Test pressure	Hydrostatic test to5 psi (35 Kpa) on each compartment.
3. Working pressure	Atmospheric.
4. Capacity	10000L plus 3~5% ullage.
5. Compartments	Single compartment.
6. Interior weld finish	Not polished or grinded (W-0).
7. Exterior weld finish	Not polished or grinded (W-0).
8. Shell material	Stainless steel 304 2B.
a) Top	3.7mm nominal.
b) Sides	3.7mm nominal.
c) Bottom	3.7mm nominal.
9. End Plate	Stainless steel 304 2B, 3.7mm nominal.
	All single heads dished and flanged.
10. Bulkhead	Nil.
11. Baffle / Surge Heads	Stainless steel 304 2B, 3.7mm nominal.
	Dished with flap.
	1pcs.
12. Spill molding and rollover protection	Stainless steel around the dome with drain hose.
13. Spill molding lids	Nil.
14. Outer rings	304-2B stainless steel, 60mm height, 3mm nominal, continuously welded.
15. Frame	Carbon steel independent.
16. Loaders and brackets	Carbon steel.
15. Isolation	Nil.
16. Exterior lining	Nil.
B. TANK FITTINGS AND PIPING
1. Manholes	20" diameter with 6 stainless steel wing nuts, located  at  the  top  center
	1 pc.
2. Pressure Vacuum Vent	Two per compartment. 6~12 kPa pressure, 2~4 kPa vacuum.
	Chinese Brand
6.Foot valve	Nil.
7. Discharge system	3" diameter discharge with 3" diameter butterfly valve, 3" stainless steel male camlock coupling and quick cap, located at the back of the tank.
8. Piping	Nil.
9. Thermometer	Nil.
10. Steam trace	Nil.
11. Overfill  Prevention	Nil.
12. Tow Hook	Nil.
13. Product Indicators	Nil.
C. ACCESSORIES
1. Ladder	Stainless steel, 400mm wide, with non skid rungs and lateral handles, mounted at right middle of tanker.
2.  Walkway	Extruded aluminium around dome.
3. Hose Carries	1 no, hose carrier (round tubes) to fit Ø159 x 6meter (236") hose close type complete with brackets to be installed at the right side.
4. Hose	Firemen type flexible discharge hoses, 30m 2.5" for discharge. and flexible plastics suction hoses, 5.9m 3"for suction, 3" female camlock coupling at both ends.
5. Motor Pump	BRIGGS & STRATTON Gasoline motor , 4 stroke motor, fuel tank capacity 4.0 liters of gasoline, WB30 pump with a 3" input and outlet diameter, 7m suction head, discharge capacity 900L/min (238Gal/min) pump head pressure 33 m, weight 30kg.
6. Toolbox	Nil.
7. Rear Bumper	Aluminium member to accommodate light assembly and number plate to cover full width of the tank.
	Steel bumper with ground clearance 500mm approx.
9. Hazchem Plate	Nil.
10. Mudguard	Aluminum over suspension and the upper coupler.
	Mud flaps rigid plastic at the rear.
11. Lights & Wiring	24V. ISO 1185 7 pin socket.
	Harness: oil and vapour proof cable.
	Front: nil.
	Side:
	Mark lamp 3Pcs/side,
	Reflector 3Pcs/side
	Turning lamp 1Pcs/side, LED.
	Rear Bump:
	Reverse lamp R-L 2Pcs, LED.
	Turning lamp R-L 2Pcs, LED.
	Brake lamp R-L 2Pcs, LED.
	Register plate light
	Rear top: nil.
	Brand of Wiring: Phillips
12. Reverse alarm	Nil.
13. Connector Box	At the center in the front dishend
14. Sticker	50mm wide red-white reflective sticker, mounted at both sides and rear bump. 50mm
15. Hand rail	Nil.
16. Fire Extinguisher	8kg , 2Pcs.
	Carbon steel extinguisher holder located on the landing gear on the curb side.
17. Drains hose	water drains hose 2", installed at the back of spill molding
18. Wheel chocks	Nil.
19. Traffic cone	Nil.
21. Spare wheel bracket	A carbon steel basket type spare tire rack, installed behind the outriggers
	Carbon steel, basket type, located behind the landing gear.
21. Painting	Polyurethane medium Aluminium gray, applied over epoxy primer on carbon steel elements

Customer visiting

Certifications

 

FAQ

Q1. What's your MOQ?
One unit trailer or truck. 
Q2. Can you satisfy my special requirement?
Definitely! We are direct manufacturer and we have strong producing capacity and R&D capacity!
Q3.How about your product quality?
High quality has always been our advantage.We all use high quality brand materials with 100% quality assurance.Established a procedure to check products at all stages of the manufacturing process,raw materials,process materials,validated or tested materials finished goods ect.
Q4. How can I get the price of your dump truck?
You can contact with us through any of the following contact information. Our personalized service person will respond you within 24 hours.
Q5. Is it available to print our own brand on the dump truck?
Totally acceptable as you wish.
Q 6: What's the delivery time? 
The delivery time is within 30-50 working days after receiving your advance payment. 
Q 7:How do you transport the dump truck?
We transport the vehicle by bulk or container. Our factory possess long -term cooperation with ship agency which can provide you lowest shipping fee.
Q8: Can you supply some quick-wear truck or dump truck parts? 
Yes, we can supply truck and dump truck, parts as your request.